• Birchmeier Aqua Mix 1.25v
    Birchmeier Aqua Mix 1.25v
  • Birchmeier RPD 15L Backpack Sprayer
    Birchmeier RPD 15L Backpack Sprayer
  • Disposable Safety Overalls
    Disposable Safety Overalls
  • Nitrile Chemical Gloves
    Nitrile Chemical Gloves
  • Disposable P2 Vapour Masks
    Disposable P2 Vapour Masks
  • Birchmeier Aqua Mix 1.25v

    Click on hose applicator that is very easy to use and gives you a quality result when applying soil amendments, wetting agents and insecticides.

    How it works

    The spray bottle holds up to 1.25L of product and when clicked onto the hose and in use it sucks up the product at a chosen rate by you from its 4 settings. 0.2 is the lowest setting ( so the slowest in which the product will be sucked through with water ) it then has a 0.5 option, 1.0 option and a 2.0 option.

    Sprayer Guidelines

    It is always best practise to fill the bottle with water first to trail it and get an understanding of how  quick or slow products come through the bottle at your walking speed and hose pressure. Start on setting 1 and either go up or down dependent on your needs. Remember the aim is to empty that bottle across your lawn at an even walking pace.

    As a general rule I personally use it from 1.0 – 2.0. I always firstly measure out my area to determine my product rates. For example 150m2 ( average size lawn)  When mixing I put in a splash of water then my products. For my products on an area of 150m2 Sandy soil I would use 150ml retain pro and wsf seaweed 300ml. After I have put the products in I always top up the bottle with water to the 1.25ltr mark then put the lid on and give it a good shake.

    I then strip then lawn free of any kids toys, dog toys or adults belongings prior to spraying. When spraying I walk in 1.5m bays (strips) across my lawn, starting at my closest point and walking away from the tap. Once I complete my spray and my bottle is blown itself empty the pressure spikes up and I go back over the lawn walking it bays with fresh water to wash the product off the leaf and into the soil. Alternatively you could run the sprinkler to do this last part. Though best practise is the water it in yourself if you not confident that your sprinkler gets very blade of grass that you just sprayed product onto.

    My guide for setting changes

    100m2 or bellow I fill to the top and use setting 2.0

    100m2-200m2 I use setting 1.0

    200m2-300m2 I use setting 0.5

    I also think if you have a front yard and a back yard that you are treating it is worth  breaking up the application and using 2 bottles worth for example

    Front 80m2 back 150m2

    Do 1 bottle for the front working out your rates off 80m2 Retain pro 80ml wsf seaweed 160ml then fill to the top with water and use setting 2.0 to apply the products.

    Mix another bottles worth for the back at rates off 150m2  so 150m2 retain and 300ml wsf seaweed and use setting 1.0.  Once applied on both water in as required by either going back over it with fresh water or putting the sprinkler on it for the desired minutes required.

    Birchmeier Aqua Mix 1.25v

    Click on hose applicator that is very easy to use and gives you a quality result when applying soil amendments, wetting agents and insecticides.

    How it works

    The spray bottle holds up to 1.25L of product and when clicked onto the hose and in use it sucks up the product at a chosen rate by you from its 4 settings. 0.2 is the lowest setting ( so the slowest in which the product will be sucked through with water ) it then has a 0.5 option, 1.0 option and a 2.0 option.

    Sprayer Guidelines

    It is always best practise to fill the bottle with water first to trail it and get an understanding of how  quick or slow products come through the bottle at your walking speed and hose pressure. Start on setting 1 and either go up or down dependent on your needs. Remember the aim is to empty that bottle across your lawn at an even walking pace.

    As a general rule I personally use it from 1.0 – 2.0. I always firstly measure out my area to determine my product rates. For example 150m2 ( average size lawn)  When mixing I put in a splash of water then my products. For my products on an area of 150m2 Sandy soil I would use 150ml retain pro and wsf seaweed 300ml. After I have put the products in I always top up the bottle with water to the 1.25ltr mark then put the lid on and give it a good shake.

    I then strip then lawn free of any kids toys, dog toys or adults belongings prior to spraying. When spraying I walk in 1.5m bays (strips) across my lawn, starting at my closest point and walking away from the tap. Once I complete my spray and my bottle is blown itself empty the pressure spikes up and I go back over the lawn walking it bays with fresh water to wash the product off the leaf and into the soil. Alternatively you could run the sprinkler to do this last part. Though best practise is the water it in yourself if you not confident that your sprinkler gets very blade of grass that you just sprayed product onto.

    My guide for setting changes

    100m2 or bellow I fill to the top and use setting 2.0

    100m2-200m2 I use setting 1.0

    200m2-300m2 I use setting 0.5

    I also think if you have a front yard and a back yard that you are treating it is worth  breaking up the application and using 2 bottles worth for example

    Front 80m2 back 150m2

    Do 1 bottle for the front working out your rates off 80m2 Retain pro 80ml wsf seaweed 160ml then fill to the top with water and use setting 2.0 to apply the products.

    Mix another bottles worth for the back at rates off 150m2  so 150m2 retain and 300ml wsf seaweed and use setting 1.0.  Once applied on both water in as required by either going back over it with fresh water or putting the sprinkler on it for the desired minutes required.

    Birchmeier Aqua Mix 1.25v
  • Birchmeier RPD 15L Backpack Sprayer

    This backpack sprayer is Really comfortable to use and cleans easy. It can be used Left or right and packs away nice and tight with its foldable arm. This has saved me lots of space in my garage and car and has avoided sprayer nozzles and arm breakages.

    How to use

    The only way to correctly use a back pack sprayer or any sprayer is to calibrate it. Is comfortable to use, easy to use and packs away nice and tight taking up minimal area were it is stored. It had great filters that also avoid blocked nozzles and has interchangeable nozzles that achieve different water rates.

    Guidline for calibration

    1.Measure and work out the size of your home lawn using a tape measure or measuring wheel.

    2. Purchase a 5ltr Knap sack or 15ltr  back pack sprayer based on your area size. The rule to thumb would be lawns under 125m2 get a 5ltr and home lawns between 125m2-500m2 buy a 15ltr back pack sprayer. The ones I sell come fitted with a fan nozzle used for quality control.

    3. We want to work out our output firstly over 100m2 so a few options would be to mark out a 10m by 10m (100m2), 5m by 10m (50m2) the double your answer, 2m by 10m (20m2) and times your answer by 5. You can do this on your grass or the driveway.

    4. Fill your sprayer right up to the top and know your mark. Do this with water only and proceed to evenly spray across your lawn sideways walking away from the spray. You should hold the nozzle 30cm off the ground and maintain a consistent pressure by pumping when needed. If you struggle to see you could add some food colouring as an indicator.

    5. After you have sprayed use a measuring jug to refill the sprayer back to the top measuring how much water was used over the area.

    6. The amount of water that you have to put back into the sprayer for example 3l over 100m2 is your H20 rate.

    Birchmeier RPD 15L Backpack Sprayer

    This backpack sprayer is really comfortable to use and cleans easy. It can be used Left or right and packs away nice and tight with its foldable arm. This has saved me lots of space in my garage and car and has avoided sprayer nozzles and arm breakages.

    How to use

    The only way to correctly use a back pack sprayer or any sprayer is to calibrate it. Is comfortable to use, easy to use and packs away nice and tight taking up minimal area were it is stored. It had great filters that also avoid blocked nozzles and has interchangeable nozzles that achieve different water rates.

    Guidline for calibration

    1.Measure and work out the size of your home lawn using a tape measure or measuring wheel.

    2. Purchase a 5ltr Knap sack or 15ltr  back pack sprayer based on your area size. The rule to thumb would be lawns under 125m2 get a 5ltr and home lawns between 125m2-500m2 buy a 15ltr back pack sprayer. The ones I sell come fitted with a fan nozzle used for quality control.

    3. We want to work out our output firstly over 100m2 so a few options would be to mark out a 10m by 10m (100m2), 5m by 10m (50m2) the double your answer, 2m by 10m (20m2) and times your answer by 5. You can do this on your grass or the driveway.

    4. Fill your sprayer right up to the top and know your mark. Do this with water only and proceed to evenly spray across your lawn sideways walking away from the spray. You should hold the nozzle 30cm off the ground and maintain a consistent pressure by pumping when needed. If you struggle to see you could add some food colouring as an indicator.

    5. After you have sprayed use a measuring jug to refill the sprayer back to the top measuring how much water was used over the area.

    6. The amount of water that you have to put back into the sprayer for example 3l over 100m2 is your H20 rate.

    Birchmeier RPD 15L Backpack Sprayer
  • Disposable Safety Overalls

    Disposable Safety Overalls

    Disposable Safety Overalls

    Disposable Safety Overalls (Set of 3)

    Disposable Safety Overalls (Set of 3)
  • Nitrile Chemical Gloves

    Disposable Nitrile Gloves

    Disposable Nitrile Gloves

    Disposable Nitrile Gloves (Box)

    Disposable Nitrile Gloves (Box)
  • Disposable P2 Vapour Masks

    Disposable P2 Vapour Masks

    Disposable P2 Vapour Masks

    Disposable P2 Vapour Masks (Set of 3)

    Disposable P2 Vapour Masks (Set of 3)